¿Un expert advisor por cada metatrader en funcionamiento?

[eurer]

Bueno, estoy probando el expert advisor que viene por defecto en metatrader, llamado MACD simple.Abro grafico de 1 minuto y activo expert , luego abro gráfico de 5 minutos y activo otra vez el expert advisor con el msimo expert advisor, el MACD simple.
El metatrader, en mcuhas ocasiones, me abre la posición en grafico de 1 minuto y la ciera en grafico de 5 minutos, y yo quiero que simpre abra o cierre posiciones en en el mismo grafico de minutos, osea 1 ó 5 cinco minutos.
Mi pregunta es si tengo que cambiar alguna configuracion en el metatrader para "decirle" que cada grafico con su expert advisor es independiente del otro grafico con el mismo expert advisor abierto.Espero haberme explicado bien.Adjunto dicho expert advisor, por si hubiera aqui que modificar algo.


//+------------------------------------------------------------------+
//| MACD Sample.mq4 |
//| Copyright © 2005, MetaQuotes Software Corp. |
//| http://www.metaquotes.net/ |
//+------------------------------------------------------------------+

extern double TakeProfit = 50;
extern double Lots = 0.1;
extern double TrailingStop = 30;
extern double MACDOpenLevel=3;
extern double MACDCloseLevel=2;
extern double MATrendPeriod=26;

//+------------------------------------------------------------------+
//| |
//+------------------------------------------------------------------+
int start()
{
double MacdCurrent, MacdPrevious, SignalCurrent;
double SignalPrevious, MaCurrent, MaPrevious;
int cnt, ticket, total;
// initial data checks
// it is important to make sure that the expert works with a normal
// chart and the user did not make any mistakes setting external
// variables (Lots, StopLoss, TakeProfit,
// TrailingStop) in our case, we check TakeProfit
// on a chart of less than 100 bars
if(Bars<100)
{
Print("bars less than 100");
return(0);
}
if(TakeProfit<10)
{
Print("TakeProfit less than 10");
return(0); // check TakeProfit
}
// to simplify the coding and speed up access
// data are put into internal variables
MacdCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,0);
MacdPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,1);
SignalCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,0);
SignalPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,1);
MaCurrent=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,0);
MaPrevious=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,1);

total=OrdersTotal();
if(total<1)
{
// no opened orders identified
if(AccountFreeMargin()<(1000*Lots))
{
Print("We have no money. Free Margin = ", AccountFreeMargin());
return(0);
}
// check for long position (BUY) possibility
if(MacdCurrent<0 && MacdCurrent>SignalCurrent && MacdPrevious<SignalPrevious &&
MathAbs(MacdCurrent)>(MACDOpenLevel*Point) && MaCurrent>MaPrevious)
{
ticket=OrderSend(Symbol(),OP_BUY,Lots,Ask,3,0,Ask+TakeProfit*Point,"macd sample",16384,0,Green);
if(ticket>0)
{
if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("BUY order opened : ",OrderOpenPrice());
}
else Print("Error opening BUY order : ",GetLastError());
return(0);
}
// check for short position (SELL) possibility
if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious &&
MacdCurrent>(MACDOpenLevel*Point) && MaCurrent<MaPrevious)
{
ticket=OrderSend(Symbol(),OP_SELL,Lots,Bid,3,0,Bid-TakeProfit*Point,"macd sample",16384,0,Red);
if(ticket>0)
{
if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("SELL order opened : ",OrderOpenPrice());
}
else Print("Error opening SELL order : ",GetLastError());
return(0);
}
return(0);
}
// it is important to enter the market correctly,
// but it is more important to exit it correctly...
for(cnt=0;cnt<total;cnt++)
{
OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
if(OrderType()<=OP_SELL && // check for opened position
OrderSymbol()==Symbol()) // check for symbol
{
if(OrderType()==OP_BUY) // long position is opened
{
// should it be closed?
if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious &&
MacdCurrent>(MACDCloseLevel*Point))
{
OrderClose(OrderTicket(),OrderLots(),Bid,3,Violet); // close position
return(0); // exit
}
// check for trailing stop
if(TrailingStop>0)
{
if(Bid-OrderOpenPrice()>Point*TrailingStop)
{
if(OrderStopLoss()<Bid-Point*TrailingStop)
{
OrderModify(OrderTicket(),OrderOpenPrice(),Bid-Point*TrailingStop,OrderTakeProfit(),0,Green);
return(0);
}
}
}
}
else // go to short position
{
// should it be closed?
if(MacdCurrent<0 && MacdCurrent>SignalCurrent &&
MacdPrevious<SignalPrevious && MathAbs(MacdCurrent)>(MACDCloseLevel*Point))
{
OrderClose(OrderTicket(),OrderLots(),Ask,3,Violet); // close position
return(0); // exit
}
// check for trailing stop
if(TrailingStop>0)
{
if((OrderOpenPrice()-Ask)>(Point*TrailingStop))
{
if((OrderStopLoss()>(Ask+Point*TrailingStop)) || (OrderStopLoss()==0))
{
OrderModify(OrderTicket(),OrderOpenPrice(),Ask+Point*TrailingStop,OrderTakeProfit(),0,Red);
return(0);
}
}
}
}
}
}
return(0);
}
// the end.

[elcctrro]

El problema lo tienes en que a la hora de gestionar las ordenes de cierre los expertos no discriminan las ordenes que son suyas de las que son de otros expertos.
Cuando lanza las ordenes:
ticket=OrderSend(Symbol(),OP_BUY,Lots,Ask,3,0,Ask+TakeProfit*Point,"macd sample",16384,0,Green);
esta usando el Num Magic = 16384, sin embar cuando gestiona las ordenes de cierre no pone un condicional para solo actuar sobre las ordenes que tienen este Num Magic., lo hace sobre cualquier orden abierta.
Un saludo.

[eurer]

Gracias por la respuesta.